How does the touch screen of the Cosmo VW Campervan work? Master power, lights & waking it up


 
Spaceships Crew
Last Updated: 2 weeks ago

The Cosmo's touch screen controls everything except the diesel heater: the tank level sensors, the tap in the sink, the hob, the lights, and the water pump.

Waking the screen up

Double tap anywhere on the screen to wake the system from sleep mode.

12V power is supplied directly from the leisure battery to the main unit and the tank level sensor unit. The touch screen is powered via a cable from the main unit.

Master Power: when to turn it on and off

Master Power is the main switch for the camper's electrical features.

  • Turn it ON when you want to use the lights, the hob or the water pump.
  • Turn it OFF when you are not using these features, for example when you are out exploring or leaving the camper for the day.
  • You can leave Master Power ON while you are staying in the camper, so there is no need to keep switching it on and off throughout the day.

What about the fridge? No worries there: the fridge runs off a separate battery, so it will keep running even when Master Power is switched OFF.

Battery Select: you do not need to use it

The Battery Select button (the icon with the car and lightning symbol) is a factory setting of the touch screen. It does not affect how your camper operates - it makes no difference whether it is switched on or off, or which battery symbol is shown. So there is no need to use the Battery Select button at all.

For the official touch screen manual, see the SavvyVan 3 user guide.

Lights

  1. To use the lights, press "Master Power" on the touch screen.

  2. The circular lights can be activated by touching either the light itself or the metal surround (depending on the light type).

  3. The light on the splash back is activated by pressing the "Kitchen Light" button.

  4. The pop-top light is activated by pressing the "Roof Light" button or "Master Lights".

  5. Pressing "Master Lights" will turn off all lights.

Master Power switch (230V shore power)

When the van is plugged into 230V shore power and the red Master Power switch under the sink is ON (I), the system converts 230V AC to approximately 13.8V DC (up to about 12A / 155W), supplies the van's 12V leisure circuits, and normally uses spare capacity to charge the leisure battery.


Was this article helpful?