The passenger bench seat of the Cosmo is a two-person swivel seat. It can swivel around to form part of the dining area.
How to swivel the seat
Step 1: release the four bolts (two on the front, two on the rear). Once released, lift and turn them 90 degrees until they locate and are held up - this stops them dropping into other holes in the swivel seat base as you turn the seat.
Step 2: push the seat forward and toward the driver's seat slightly.
Step 3: start to spin the seat around anti-clockwise (towards the driver's seat). It should move freely - you might need to adjust the arm rest of the driver's seat and the head rests of the swivel seat if they get caught.
Step 4: once spun around, move the seat forward and secure one of the bolts to stop the seat moving on its swivel plate.
Important - before driving
You must spin the swivel seat back around and secure all 4 bolts properly before you drive.
Items stored under the squab of the swivel bench seat
Two backup portable cookers and 2 gas cans (in case the vehicle runs below 25% of its fuel level and the diesel cooker stops working)
The grey water waste hose in a green bag (for emptying the grey water at a dump station)
The freshwater hose to refill the external water tank
The jack and tools